AST 22311CW33 spherical roller bearings

G:M12x1,25; r:2; m:12 mm; S:33.3 mm; B:77.8 mm; T max.:100 °C; C1:9 mm; C0:49.5 kN; d:70 mm; SW:6 mm;

d:45.000 mm; B:30.20 mm; Basic Dynamic Radial Load Rating C:48800 N; Accessories:Two Seals & Snap-Rin; Sealed Speed Rating n3:5000 rpm; Fillet Radius ra:1.00 mm; D:85.0000 mm; Oil Speed Rating n2:6700 rpm; Grease Speed Rating n1:5000 rpm; Basic Static Radial Load Rating Co:39000 N;

T max.:200 °C; Recommended tightening torque for set screw:22 Nm; N1:30 mm; s1:27.8 mm; A:60 mm; L1:68 mm; Weight:3.67 kg; H1:22.5 mm; Z:77.7 mm; Designation of housing:PE211N-;

e:10 mm; G:M6x1; B:43.5 mm; Dz:100 mm; A:40 mm; S:10.9 mm; A2:42.6 mm; A1:14 mm; Designation of bearing:US210G2T20; C:35.1 kN;

Category:Roller Bearings; EAN:0692314621189; C:23.44 mm; Max operating temperature, Tmax:120 °C; D:120 mm; Minimum Buy Quantity:N/A; r1a max:0.8 mm; Inventory:0.0; Brand:NTN; Manufacturer Name:NTN;

H1:13 mm; S:17.5 mm; Designation of housing:PA207-; B:42.9 mm; A1:27 mm; C0:15.2 kN; s1:21.45 mm; A:48 mm; G:M6x1; L:110 mm;

Characteristic inner ring frequency, BPFI:4.44 Hz; D:26 mm; da max:13.5 mm; rs min:0.3 mm; Brand:NTN; Da max:24 mm; Min operating temperature, Tmin:-25 °C; d:10 mm; Fatigue limit load, Cu:0.09 kN; Max operating temperature, Tmax:110 °C;

D:130.0000 mm; d:75.000 mm; Grease Speed Rating Open/Shielded n1:4800 rpm; Oil Speed Rating n2:5600 rpm; Basic Static Radial Load Rating Co:49000 N; Accessories:Two Seals & Snap-Rin; Oil Speed Rating Open/Shielded n2:5600 rpm; B:25.00 mm; Grease Speed Rating n1:4800 rpm; Sealed Speed Rating n3:3200

Z:77.7 mm; T max.:100 °C; H2:124.5 mm; Designation of bearing:UC211-34G2T04; L1:68 mm; C0:29.2 kN; Recommended tightening torque for set screw:16.8 Nm; A1:35 mm; Designation of open end cover:SCOU211-34; C:43.55 kN;

G2 - Heat Generation Factor (Rib-Roller End):39; K - Factor8:0.79; C90 - Dynamic Radial Rating (90 million revolutions)5:34200 lbf; db - Cone Backface Backing Diameter:5.75 in; C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)1:230000 lbf; d:4.5000 in; da - Cone Frontface Backing Diameter:

d:210.000 mm; Basic Static Radial Load Rating Co:400000 N; Oil Speed Rating n2:2300 rpm; Fillet Radius ra:2.50 mm; B:50.00 mm; Basic Dynamic Radial Load Rating C:286000 N; D:340.0000 mm; Grease Speed Rating n1:1400 rpm; Fillet Radius rb:1.00 mm;

Dimension R:1.6 in; Dimension H:1.9 in; Tensioning Unit Type:Tension Type; Cor - Static Load Rating:110381 lbf; Support Type:Take-Up; Dimension X:1.7 in; Ca - Axial Load Rating:5620 lbf; Maximum Speed:2130 rpm; Bearing Type:Split Cylindrical Re; Dimension S:2.8 in;

Dimension A2:0.6563 in; Basic Dynamic Radial Load Rating:4560 lbf; Insert Bearing IB:Stainless Steel; Shaft Diameter D:1 3/8 in; Weight W:1.46 lb; Distance J:3.6250 in; Dimension A1:1.3750 in; Dimension L:4.6250 in; Diameter N:0.5469 in; Height T:1.8281 in;

H:144 mm; J:117 mm; L1:72 mm; T min.:-20 °C; Weight:0.95 kg; e:18 mm; Recommended tightening torque for set screw:3.7 Nm; Dz:70 mm; S:15.9 mm; s1:19.05 mm;

Dc max:109 mm; Inventory:0.0; Max operating temperature, Tmax:120 °C; rs min:1.5 mm; da min:78 mm; Bore:2.756 Inch | 70 Mill; Harmonized Tariff Code:8482.50.00.00; Min operating temperature, Tmin:-40 °C; d1:89.6 mm;